OTHER EQUIPMENT

DITCH WITCH RT115

  • Powered by a 121-hp (90-kW) turbocharged Tier 4 Deutz® engine and featuring a massive undercarriage and Quad Track System, the RT115 Quad is the ultimate trenching and plowing machine.

  • SPEC SHEET

  • Rental Rate:

    WEEKLY - $4,300.00

    4 WEEK - $12,900.00

  • OWNERS MANUAL

MINI X BREAKER ATTACHMENT

  • N/A

  • N/A

  • LIST PRICE - $10,000

    RENTAL RATE:

    WEEKLY - $590.00

    4 WEEK - $1,900.00

  • N/A

TEST SLUG

  • These Test Slugs are simple aluminum mandrels designed to be pulled through the duct to test for out of roundness. The slug diameters will fill approximately 70% of Schedule 40 ducting and 80% of Schedule 80 ducting. The ends are rounded for convenient pulling in either direction

  • N/A

  • LIST PRICE:

    Test Slug - Aluminum for 1-1/2" Dia. Sched.40 Duct - $95.79

    Test Slug - Aluminum for 2" Dia. Sched.40 Duct - $103.65

  • N/A

INNERDUCT SEAL KIT

  • DCD offers two types of seals. The Innerduct Seal is a screw-in type that requires one product for each duct size. The second type is a Universal Seal which is a tapered product suitable for all duct sizes from 1” to 2”. This is for use on short distance blowing where simply holding the seal against the end of the duct will do the job and save time. The Kit comprises all four Innerduct Seals plus the Universal Seal. A Control Valve and Rope Guides are also included.

  • N/A

  • LIST PRICE -

    Universal Seal Kit with Control Valve: $1,137.45

  • N/A

CONTROL VALVE

  • The Control Valve is an integral part of the DCD blowing system. A ball valve allows control of air flow and quick disconnect fittings are attached at both ends. Three Rope Guides are included with each Control Valve purchased.

  • SPEC SHEET

  • LIST PRICE - $159.91

  • OWNERS MANUAL

INNERDUCT UNIVERSAL SEAL

  • The Innerduct Seal is a universal seal which is a tapered product suitable for all duct sizes from 1” to 2”. This is for use on short distance blowing where simply holding the seal against the end of the duct will do the job and save time.

  • 1” - 2”

    1.5 LB

  • LIST PRICE: $132.00

  • OWNERS MANUAL

RUF ROD DELUXE W/ ACCESSORIES

GMP E RODDER

  • The GMP E Rodder, powered by a DEWALT FLEXVOLT® battery, provides quiet and emission-free operation. It can push 180 lbs force at 125 feet per minute. It comes with a variable speed remote hand control, optional foot control, and is mounted on a three-wheel cart with airless tires for easy maneuverability. The handle folds flat for convenient transportation.

  • OPERATING CAPACITIES
    Max Pushing Load:180lbs. (800 N)
    Max Pushing Speed:125 feet/minute (38m/min)
    Battery Life Max Pull:8500' @ 600 lbs. & 175 feet/minute

    E RODDER DIMENSIONS
    Height:44 in (1118mm)
    Height Folded:30 in (762mm)
    Length:52 in (1321mm)
    Width:26 in (660mm)
    Weight:80 lbs. (36kg)

    BATTERY

    Battery Type: DEWALT FLEXVOLT® 12.0 Ah Battery (DCB612)
    Battery Size:60V
    Height:7.75 in (197mm)
    Length:7.875 in (200mm)
    Width:3.625 in (92mm)
    Weight:3.4 lbs. (1.5kg)

    WHAT'S INCLUDED

    • eRodder

    • Duct Collet, Size Your choice*

    • 60V DEWALT FLEXVOLT® 12.0 Ah Battery (DCB612)

    • DEWALT Charger

    • Trigger control (foot pedal optional)

  • LIST PRICE - $8,930

  • OWNERS MANUAL

  • The 7/16” Ruf Rod features our largest frame with a 40” diameter storage basket, which can hold up to 1500' of 7/16” fiberglass rod. The standard Ruf Rod includes a female rod end, a swivel rod end, and a pulling eye. The deluxe version includes accessories as listed below. All accessories that attach to the rod can be glued in the traditional manner or can be clamped with set screws. For extra security, they can be both glued and clamped.

  • 7/16" X 1000 Ft.

    WEIGHT: 144 LB

    DIMENSIONS: 41-3/4” L 44-1/2 H 16-3/4 W

  • LIST PRICE - $2,934.47

  • N/A

TYPE 2 CLEVIS

  • The clevis by clevis style of swivel is the most common type and is the best for distributing side loads applied on the swivel due to its ability to pivot at either end. It does not allow the operator to push back without proper care and attention or the swivel may fold back on itself. Before rotation is recommenced, the line must be pulled straight or damage may occur to the swivel, as well as potential harm to nearby operators. DCD recommends that some type of restrictor be used to prevent the swivel from pivoting at the front or reamer end.

  • Dub-lite Swivel Swl 5,000 Lb 1-1/4" Dia. $254.19

    Dub-lite Swivel Swl 8,500 Lb 2" Dia. $529.70

    Dub-lite Swivel Swl 10,000 Lb 2-1/4" Dia. $620.53

    Dub-lite Swivel Swl 15,000 Lb 2-1/2" Dia. $722.74

    Dub-lite Swivel Swl 20,000 Lb 2-1/2" Dia. $795.73

  • Dub-lite Swivel Swl 5,000 Lb 1-1/4" Dia. $254.19

    Dub-lite Swivel Swl 8,500 Lb 2" Dia. $529.70

    Dub-lite Swivel Swl 10,000 Lb 2-1/4" Dia. $620.53

    Dub-lite Swivel Swl 15,000 Lb 2-1/2" Dia. $722.74

    Dub-lite Swivel Swl 20,000 Lb 2-1/2" Dia. $795.73

  • N/A

PLUMETT HYDRAULIC POWER PACK

  • Engine: Honda 8.0 / 9.0 HP air cooled @ 3,900 RPM

    Hydraulic System: 6.0 gpm pump output with 11.5-gallon reservoir & extension hoses

  • Dimensions: 42” x 19” x 24”

    Bare Weight: 261 lbs.

    Shipping Weight: 310 lbs.

  • LIST PRICE - $4995.00

    RENTAL RATE:

    WEEKLY - $180

    4 WEEK - $650

  • N/A

PLUMETT AIR AFTER-COOLER

  • Dramatically improve "Jetting" performances with this accessory when  ambient temperatures exceed 20°C (68°F).  This accessory is highly recommended to increase distance, installation speed, and reduce the potential of cable damage due the undue influence of high heat on cable jackets.

  • Standard Version - Air After-Cooler

    Type - AC-12

    Application - Intelli-MicroJet | MicroJet | Opti Jet | IntelliJet | MiniJet | CableJet | SuperJet

    Clutch - 0.85 (at 7 bar)

    Max. Working Pressure [psi] - 174

    Max. Air Flow [ft3/min] - 423.72

    Max. Air Inlet Temperature [F] - 180

    Max. Air Pressure at the motor [psi] - 102

    Max. Pressure Drop [psi] - 4.3

    Dimensions of apparatus l x w x h [in] 26.77 x 16.54 x 22.83

    Total Shipping weight [lbs] - 108

  • Call for Pricing

  • N/A

RALLY A FRAME

  • Reel stand

  • 48 x 36 in

  • LIST PRICE - $1800.00

    SALE ONLY

  • N/A

CONDUX HYDRAULIC POWER PACK

  • This portable power source is matched perfectly to the requirements for the Condux Fiber Optic Cable Blower and Puller. Utilizing a small footprint, the 13hp Power Pack features a variable flow switch (from 5gpm to 8gpm) to ensure that every job can be covered with just one machine.

  • 16 HP Power Pack

    Hydraulic System: Open Center

    Frame Type: Two Wheel Mobile Unit

  • LIST PRICE - $9000.00

    RENTAL RATE:

    WEEKLY - $180

    4 WEEK - $650

  • N/A

*Prices Subject to Change

please use our contact link, email, or call us for most recent price options

AIR HOSE

  • AIR HOSE FOR COMPRESSOR

  • 50 FT

  • LIST PRICE - $180.00

    RENTAL RATE:

    WEEKLY - $40

    4 WEEK - $120

  • N/A

BOBCAT MINI EXCAVATOR - E26

  • The Bobcat® E26 compact (mini) excavator features minimal tail swing to reduce the risk of damage to your machine and surrounding objects. 

    Easily maneuver established lawns, crowded jobsites and sensitive surfaces with the compact size and minimal ground disturbance.

    Boost your working range with the standard long arm configuration.

  • Operating weight: 6489 lb

    Bucket Digging Force: 5652 ibf

    Max Reach at Ground Level: 192 in

    Width: 61 in

    Tail swing Type: Minimal

  • LIST PRICE - $28,500.00

    RENTAL RATE:

    WEEKLY - $900.00

    4 WEEK - $3,000.00

  • Brochure

FREMCO HYDRAULIC POWER PACK

  • Hydraulic driven fiber blowing machines are more effective and have a significantly lower total cost of ownership compared to an airdriven machine.

  • Hydralic oil tank capacity min. 5l/max. 7l

    Working pressure nominal 100 bar (1450 psi)

    Pressure relief valve set at 110 bar (1595 psi)

    Guaranteed sound power level LWA 100 db

    Oil temparature Max. 70° C (158°F)

    Weight (w/o hydraulic oil) 54 kg (119 lbs)

    Length 630 mm (25”)

    Width 530 mm (21”)

    Height 510 mm (20”)

  • LIST PRICE - $5450.00

    RENTAL RATE:

    WEEKLY - $180

    4 WEEK - $650

  • N/A

Building tunnels is one of the trickiest parts of laying fiber optic cables. At ABS Rents LLC, we have all the horizontal directional drilling equipment you’ll need to build those tunnels and get your cables in place. In addition to the proper drilling equipment, we also have the necessary fiber optic cable installation tools to get the cables in their proper position.

Horizontal directional drilling (HDD) is a big task, but thankfully, ABS Rents LLC can help simplify it. We have all the HDD equipment to help you succeed with the job, and we also offer HDD equipment rental. As part of the horizontal directional drilling equipment we offer, you can also pick up a cable-pulling swivel to help make laying cable much easier.