FIBER OPTIC SPLICING

TESTING EQUIPMENT

FUJIKURA 90R FUSION SPLICER KIT

  • The Fujikura 90R is the mass fusion splicer workhorse of the splicing world. As data demand continues to rise, the solution to handle the increased traffic is to increase fiber counts. As a result, fiber counts being utilized in enterprise data centers, campus, and metro networks have grown enough to make single fiber splicing too costly and timely. High density cabling made possible by SpiderWeb Ribbon® (SWR®) and others like it are spurring ribbon splicing activity in places that have traditionally used loose fiber. The 90R is the answer to these changes in splicing demand.

    With automated splice start, tube heater, wind protector, cleave tracking, and blade rotations for up to 2 cleavers at a time, this splicer frees up operator time for other fiber preparation steps. With 16-fiber add-ons, the Fujikura 90R splicer enables customers to successfully splice 16-count ribbon fibers with a 200 µm pitch and size.

    With the Fujikura 90R, you can keep your splicer in the field longer with field replaceable V-grooves. When V-grooves can no longer be cleaned after extended use, or are accidentally damaged, you can resume splicing in minutes by installing the spare set included with your 90R kit. Put our 90R to the test by contacting us to see its capabilities first-hand, 1-800-235-3423.

  • Fujikura 90R Fusion Splicer

    Features:

    • Cleaver tracking and upkeep with wireless communication

    • Automated wind protector, tube heater and splice operation

    • User replaceable v-grooves

    • 200 μm and 250 μm SWR universal ribbon prep accessories

    • Graphical User Interface with 5.0" Touchscreen

    • PC software and 90R manual downloaded from splicer

    • Multi-function transit case with integrated workstation

    Applications:

    • Data Center cable installation

    • High fiber count metro and campus networks

    • Long-haul network installs and repair

    • Trunk cable repair with Splice-on MPOs

    • Ribbon splicing high density cables with 200 μm loose fiber

  • Special Introductory Pricing

    $15,500.00

  • OWNERS MANUAL

FUJIKURA SPLICER V-groove Cleaning Kit

  • Today’s splicing equipment is fast, efficient, and requires minimal maintenance due to advances in splicing technology. However, contamination in the v-groove of the splicer is still a primary source of trouble for the splicing technician. This is especially problematic when splicing with a fixed v-groove fusion splicer. Environmental contamination, such as dust, dirt, and fiber coating debris, as well as, the silica deposits generated during the fusion process eventually find their way to the surface of the v-groove. This contamination will offset the fibers and degrade performance. To help control this problem, a disciplined cleaning regimen and specific tooling is required to ensure the splice is right the first time. To solve cleaning needs, AFL offers the Splicer V-Groove Cleaning Kit. This product integrates eight components into an affordable and effective inspection and cleaning solution for any fusion splicer. Small and lightweight, it fits easily into the Fujikura splicer transit case or it can be carried separately in its own carrying case.

    Kit Includes

    • Scrubber Brush with stiff tapered nylon bristles

    • Sweeper Brush with soft nylon bristles

    • Eye Loupe with 3X to 12X magnification

    • LED Pen Light with momentary or constant on switching

    • Cleaning Fluid that is non-flammable and environmentally safe

    • Lint-free Cotton Swabs

    • Instruction Sheet with illustrations

    • Canvas Carrying Case

    Refill Kit Includes

    • To replenish the consumables within the kit, AFL provides a refill kit that includes the following components:

    • One can of FCC2 Cleaning Fluid

    • One Scrubber Brush

    • One Sweeper Brush

    • Ten packs CS-1 Cotton Swabs (250 swabs)

    Ordering Information

    Model                  Description
    S014397             Splicer V-Groove Cleaning Kit
    S014416             Splicer V-Groove Cleaning Refill Kit
    S003719 CS-1   Cotton Swabs (pack of 25 swabs)

  • Splicer V-Groove Cleaning Kit

    Features:

    • Scrubber Brush with stiff tapered nylon bristles

    • Sweeper Brush with soft nylon bristles

    • Eye Loupe with 3X to 12X magnification

    • FCC2 Cleaning Fluid that is nonflammable and environmentally safe

    Applications:

    • Remove environmental contamination from the v-groove of the splicer (dust, dirt, fiber coating debris, and silica deposits)

    • Maintains performance and ensures fiber alignment

    • Proper v-groove cleaning regimen ensures the splice is right the first time

  • $199.00

  • OWNERS MANUAL

*Prices Subject to Change

please use our contact link, email, or call us for most recent price options

FUJIKURA 90S+ FUSION SPLICER KIT

KOMSHINE QX55 FIBER MASTER OTDR

  • Long-haul network testing

    Access network testing

    Live testing available

    FTTx/PON testing through splitters

    Compact, rugged, light weight 0.7kg

    All new UI design with innovation

    32dB Dynamic range

    1m Event dead zone

    Bult-in OPM、SLS、VFL、RJ45、FIP modules

    Link Map & Pass/Fail judgment functions

    Dual wavelengths testing

  • COMING SOON

  • LIST PRICE - $990.00

  • OWNERS MANUAL

  • ● High precision 6 motor backbone fusion splicer for FTTx project

    ● Core alignment, which can clearly display the fiber core (at present, only Fujikura, Sumitomo and Komshine FX39 can meet the requirements in the market)

    ● High-capacity battery is 7800mAh, which can be used for about 400 cycles splicing and heating when fully charged.

    ● FX39 can use for outdoor construion for 288 & 128 core backbone cable

    ● FX39 appearance design closely follows the international counterparts

    ● FX39 carrying case designed with workbench, which can be loaded with more necessary construction tools (power meter,VFL, pliers, etc.)

    ● Other unique designs include machine can store 10000 sets of splicing results and 2000 sets of images/average splice loss is low than 0.01dB/real-time discharge correction, stable splicing accuracy/ Equip USB interface, convenient for data download and sw update.

  • 6S fast splicing; 16S rapid heating / 4.3 inch LCD color display / 5000 times electrode service life / 7800mAh battery, 400 cycles of splicing and heating / Store 10000 sets of splicing results and 2000 sets of images.

  • LIST PRICE - $1,190

  • COMING SOON

FUJIKURA 45S STANDARD KIT

  • The 45S cladding alignment fusion splicer is changing the way people splice fiber in small to mid-fiber count applications. This Fujikura splicer debuts a landmark improvement to the fusion splicing process with the ability to prepare and load both fibers simultaneously. The hand-held fiber coating stripper, the SS-05, is capable of stripping two 250 μm coated fibers in the same pass, along with the CT-16A cleaver adapter plate which can likewise accommodate two bare fibers for cleaving. After preparation, the 45S patented sheath clamps enable loading both fibers simultaneously into the splicer with one fiber in each hand. The user can press down on the sheath clamp base to close it while positioning the fiber in the v-grooves. This enables onehanded operation.

    Furthermore, the 45S sheath clamps are mechanically linked to the wind protector, so after splicing is finished, opening the wind protector also opens both sheath clamps for quick sleeve positioning and transfer to the tube heater. The 45S tube heater shrinks sleeves much faster than its predecessor with a nominal ~20 second heat time for 60 mm sleeves down from ~26 seconds. The simultaneous fiber preparation capability, automated sheath clamp opening, and a faster tube heater, combine to lower the overall fusion splicing cycle time by ~30% or more.

    The 45S continues to benefit the user experience with improvements to fiber placement, battery access, and machine ergonomics. Previously, when using sheath clamps, if the cleaved fiber was accidentally set past the electrode centerline, the machine would send an error and require manual intervention. The 45S will now accept this mistake and reverse the fiber to correct position automatically. With a cube form factor, the 45S is easily transported and operated in space-constrained environments. The adjustable screen can alleviate glare from the sun and adjust with abnormal splicer positions confronted in challenging splice locations.

    Backed by the best service team in the industry, the Fujikura 45S is the ideal splicer to use when portability, ruggedness, speed, and reliability are needed. If you’d like to see the 45S capabilities first-hand, please contact us at 1-800-235-3423 to arrange a product demonstration at your earliest convenience.

  • Fujikura 45S Fusion Splicer

    Applications

    • 5G Small Cell Site

    • FTTx drops and terminations

    • MDF/IDF splices and terminations

    • Rural fiber deployments and restorations

    Features

    • Simultaneous fiber preparation with newly patented sheath clamp design

    • Sheath clamps automatically opened with the wind protector

    • Automatic fiber placement correction

    • Active Fusion Control for arc optimization with every splice

    • Active Blade Management for cleave quality monitoring and correction

    • Easy-access battery, screen position adjustments, and ergonomic adaptations

    • Fully ruggedized for shock, moisture and dust resistance

  • Special Introductory Pricing

    $4,500.00

  • OWNERS MANUAL

KOMSHINE FX39 FUSION OPTICAL SPLICING KIT W/ FC-30 FIBER CLEAVER

  • The Fujikura 90S+ core alignment fusion splicer solves common problems seen in the field—from splicing poor quality legacy fiber to automated equipment maintenance and upkeep. The Fujikura 90S+ can be use in multiple field splicing applications including bend-insensitive fibers in drop cables, long-haul terrestrial and submarine LEAF® fibers, loose buffer fiber, splice-on connectors, and the list goes on. The speed and accuracy of the 90S+ make it suitable for certain production and specialty environments where high output, tight packaging, and low loss requirements are required.

    Regardless of your scenario, the Fujikura 90S+ is designed to keep you in the field with an extended battery life of 300 splice and heat cycles. With its multiple automated and easy-to-use features, the 90S+ alleviates the need for traditional operation tasks such as frequent arc calibrations, cleaver blade rotations, cleaver usage tracking, and manual splicing operations. A redesigned work tray, cooling tray, and optional cable clamp make the 90S+ kit more versatile than its predecessors in adapting to varying work conditions and environments.

    When splicing loose buffer fiber, additional sheath clamps are not needed. The standard universal sheath clamp now handles both loose and tight buffer fibers. The new Active Fusion Control (AFC) technology improves splice losses for fibers that possess a poor cleave angle. Combined with Active Blade Management between the splicer and cleaver, the Fujikura 90S+ contains a robust set of splicing features that will reduce the likelihood of poor splice installations or repairs.

  • Fujikura 90S+ Fusion Splicer

    Features:

    • Cleaver tracking and upkeep with wireless communication

    • Improved real-time arc control for fibers with poor cleave angles

    • Loose and tight buffer with same sheath clamp

    • Automated wind protector, sheath clamps and splice operation

    • Graphical User Interface with 5.0" Touchscreen

    • PC software and 90S manual downloaded from splicer

    • Multi-function transit case with integrated workstation

    • Lithium-ion battery with 300 splices/shrinks per charge

    Applications:

    • Distribution fiber repair

    • Long-haul network installation

    • Field termination with splice-on connectors

    • Access network installation

    • Fanout kits, pigtails and splice cassettes

    • OSP cable installation and repair

    • Optical modules – splitters, couplers, MUXs, EDFAs and attenuators

  • Special Introductory Pricing

    $10,800.00

  • OWNERS MANUAL

To connect two fiber optic cables together, you need the proper fiber optic splicing equipment. At ABS Rents LLC, we have just the right pieces and fiber optic splicing kits to get the job done right. We’ve been in the industry for over 20 years, helping different telecom and utility owners and contractors lay aerial and buried cables. We know that working with fiber optics can be tricky, but with our fiber optic cable splicing equipment, you’ll have the right tools to get the job done.

In addition to our standard fiber optic splicing equipment, we’ll also provide you with the right network testing tools so you can guarantee that the cables you lay are properly spliced. Certainty in a field like this can be tricky, but no need to worry when you work with us at ABS Rents LLC.