CABLE LASHERS
DCD FALCON LASHER (SERIES 61800)
-
The Falcon Lasher is a completely redesigned lasher, incorporating design elements of our previous Eagle, Lineman and Model K lashers, as well as new design concepts that simplify the lasher to make it more robust and lower maintenance.
This new lasher will single or double lash without strand traction. It is also equipped with a clutch handle to allow easy mounting and passing the unit around a pole without cutting the lashing wire or removing it from the drive wheels.
-
MAX STRAND: 1/2"
MAX LASH: 3-1/2"
WIRE SIZE: dia. 0.038" to 0.061"
SPOOL SIZE: 1,200' per coil
DIMENSIONS: 20" L x 11" W x 10" H
WEIGHT: 21.3 lb
-
LIST PRICE - $6,195.00
-
DCD EAGLE LASHER (SERIES 61700)
-
The Eagle Lasher was designed and built to meet the requirements of the 21st century cable lashing jobs. Sized to install CATV or fiber optic cables, it's lightweight, durable and simple. Since its introduction four years ago, the design has proven itself on the strand, from the Arctic Circle to Asia Minor.
-
MAX STRAND: 3/8”
MAX LASH: 2-1/4"
WIRE SIZE: dia. 0.038" to 0.061"
SPOOL SIZE: 1,200' per coil
DIMENSIONS: 18" L x 18" W x 8" H
WEIGHT: 24.0 lb
-
LIST PRICE - $5,795.95
-
DCD LINEMAN LASHER (SERIES 61400)
-
The Lineman™ Lasher is the pull type cable lasher for tough jobs, especially in dusty, wet or icy conditions. Use it to lash single or multiple cables up to 3" outside diameter and for single and double overlashing.
-
MAX STRAND: 1/2”
MAX LASH: 3"
WIRE SIZE: dia. 0.038" to 0.061"
SPOOL SIZE: 1,200' per coil
DIMENSIONS: 19-1/2" L x 12" W x 12" H
WEIGHT: 38.0 lb
-
LIST PRICE: $7,175.00
-
GMP C2 LASHER
-
Our compact Model C2 Cable Lasher is perfect for lashing smaller diameter aerial cables to supporting strand with stainless steel lashing wire. The new design improvements make the C2 equally suited for new construction or overlashing up to its full 1 7/8 in. bundle capacity.
Lashes single or bundled cables up to 1 7/8 in. (46mm) onto strand sizes 1/4 in. to 3/8 in. (6-10mm) diameter
New style strand lock swings out of the way for unobstructed overlashing
Simple wire routing yields either “normal” or “loose” wire tension
Cable Lasher Parallel Pull P/N 70467
Cable Lasher Parallel Pull P/N 70467
Dual wire magazines for loading two coils of stainless steel lashing wire
Typical wire dimensions: 1200 ft. x .045 in. (365 m x 1.1mm) or 1600 ft. x .038 in. (487m x 1mm)
Lightweight and compact: Unloaded weight 35 lbs. (16kgs.); only 10 in. O.D. x 18.5 in. long (25 x 47cm). The C2’s tapered housing eases passage through treed areas
The C2 Cable Lasher is furnished with a 6 ft. (1.6m) bridle rope with snap hooks, an instruction manual and a rugged, lightweight storage chest
The C2 and every GMP lasher is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe
Like all GMP lashers, the C2 is built to last for many years of service. Components are CNC machined from alloy steel, stainless, bronze and aluminum castings to exacting tolerances and treated to withstand corrosion. Gear drives and sealed bearings assure maximum durability with minimal maintenance.
-
Designed to lash or overlash cables or bundles up to
1-7/8 in. (48 mm) diameter
Range of strand sizes: 1/4 in. - 3/8 in. (6 mm - 10 mm)
Weight: 35 pounds (16 kgs)
Wire Coil Dimensions (typical):
5.38 in. x 1.81 in. (137 mm x 46 mm)
Standard Wire Sizes:
1200 ft (365 m) of .045 in. (1.1 mm) diameter
1600 ft (487 m) of .038 in. (1.0 mm) diameter
-
LIST PRICE - $6,990.00
Weekly Rate - $400.00
4 Week Rate - $1,150.00
-
GMP J2 LASHER
-
The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire.
Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.
Consists of a rotating drum supported on a carriage that provides the mounting for a driving mechanism, cable lifters, cable and strand rollers
Each of two recessed magazines will hold a 1200 ft. coil of .045 in. (365m of 1.1mm wire) lashing wire (or 450 ft. of .065 in.). The Lashing Wire is fully recessed and covered by a gate.
Features a fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel
Cable Lasher Parallel Pull Accessory P/N 70467
J2 Lashers make overlashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable
Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break
Constructed with heat-treated, plated steel, stainless steel, brass and aluminum components. Contains sealed and oiless bearings to minimize maintenance and assure durability.
Pre-drilled and tapped at the factory for mounting of the lasher guard or “halo”. For use when lashing in overgrown areas.
The J2 and every GMP lasher is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe.
The lasher is furnished with a rugged lightweight storage chest with corrosion resistant hardware, recessed latches and a moisture-proof, tongue-in-groove design for maximum protection when not in use
Supplied with a 6 ft. bridle rope assembly and snap hooks, and an information and operation manual
-
Designed to lash or overlash cables or bundles up to
3 in. (76 mm) diameter
Range of strand sizes: 1/4 in. - 7/16 in. (6 mm - 11 mm)
Weight: 46 pounds (21 kgs)
Wire Coil Dimensions (typical):
5.38 in. x 1.81 in. (137 mm x 46 mm)
Standard Wire Sizes:
1200 ft (365 m) of .045 in. (1.1 mm) diameter
1600 ft (487 m) of .038 in. (1.0 mm) diameter
-
LIST PRICE - $8,190.00
RENTAL RATE:
WEEKLY: $450.00
4 WEEK - $1,250.00
-
GMP APOLLO LASHER
-
The latest word in aerial cable lashing. Perfect for all telcom cable construction, including Coaxial and FTTx cable. With its light weight and parallel-pull capability, you’ll string cable quickly and easily, over all outside plant cable routes.
From the company that pioneered the modern automatic lasher with Western Electric back in the 1940’s…. comes Apollo… a machine that’s lightweight, easy-to-handle and simple to operate and maintain.
The newest addition to GMP’s line of proven lashers, Apollo has all of the versatility and performance features you need to easily handle today’s broadband lashing applications, solving all of the problems associated with pulling parallel to the strand and through densely crowded cable routes.
GMP engineers designed Apollo using computer-aided design and finite element analysis to achieve its high degree of durability without any excess weight. Then, we employed the very latest in high-speed CNC machining to make every part fit and perform exactly as designed. Like all our lashers, Apollo is built to last. After all, this is not just any spinner, it’s a GMP lasher.
-
Lashes any telcom cable/innerduct combination up to 4 in. (10cm) diameter
Parallel-pull capability overcomes all terrain obstacles
Interference-free over-lashing with no modifications
Positive slip-free gear drive (no belts) tested in excess of 1 million cycles
Lashes to strand sizes 1/4 in. to 3/8 in. (6 – 10 mm) diameter
Holds two coils of industry standard wire .045 in. x 1200 ft. (1.1mm x 365m) or .038 in. x 1600 ft. (1mm x 488m)
Provides adjustable tension of lashing wire, affording tight or loose lash
Wire tension constant regardless of amount on spool
No lasher backroll when pulling force removed
Front rollers guide cables through the machine
All smooth edges throughout provide 360° protection against cable damage
Ergonomic design makes it easy to handle
Manual clutch release allows speedy span transfers
The Apollo and every GMP lasher is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe.
-
CALL FOR MORE INFO
-
GMP SUPER G LASHER
-
The newest and largest of the GMP Lashers, this unit is designed to lash a large single or a combination of aerial cables to a supporting strand. It can be used for new installs or with existing cables in place.
-
Lashes cable from about 2-1/2 to 5-1/4 in. outside diameter or multiple cables up to 5-3/4 in. combined outside diameter
Lashes on strand from 11/32 to 1/2 in. diameter with one or two spiral wrappings of .045, .061 or .065 in. diameter stainless steel wire
SuperG Large Capacity Cable Lasher
Nominal spacing between wraps is approximately 18-19 in. (46 to 48cm )
Parallel-pull capability overcomes most terrain obstacles
Wire tension constant regardless of amount on spool
Front rollers guide cables through the machine
All smooth edges throughout help protect against cable damage
Ergonomic design makes it easy to handle
Each lasher includes a 6 ft. bridle rope assembly with snap hooks, an information and operations manual and a heavy duty storage chest
Comes with 2 extra reels for easy loading in the field
-
CALL FOR INFO
-
*Prices Subject to Change
please use our contact link, email, or call us for most recent price options
Here at ABS Rents LLC, we’ve been helping companies and organizations with their telecommunication solutions for over 20 years. We’ve helped create aerial and buried solutions, and we use cable lashers to properly secure those cables. A cable lasher machine will help secure your cables together, and at ABS Rents LLC, we even have aerial cable lashers you can use to lash your cables to supporting strands.
Cables of all shapes and sizes are delicate and need care during installation, and that’s exactly what you’ll get with our cable lasher rental services. Our cable lashers ensure everything you have is secure because using the right tool for the job is the key to success.